S10 High Intensity UV/Visible Light-Curing Spot Lamp

The S10 is a high intensity compact light curing system. This light curing spot lamp is designed with low cost of ownership in mind, with its vertically mounted long-life mercury lamp, separately replaceable elliptical reflector, and filtered input long-life lightguide. The S10’s easy to use exposure time controls and foot pedal activation make operating the unit a snap. The uv system weighs in at less than 7.5 pounds, and its 10 x 5 inch footprint is the smallest in its class.
Download Bulletin for S10 UV/Visible Light Curing Spot Lamp
Download Specification for UV Short Arc Mercury Lamp - Lamp Spectral Distribution
Download Bulletin for S10 UV Spot Lamp - Spot Size vs. Distance



				Specification

				General
				Model	S10
				Order Number	290002

				Power Supply
				AC Input Voltage	90 to 265VAC
				AC Input Current	2A maximum
				Source Input Frequency	47 Hz to 63 Hz
				Lamp Power Regulation	± 2%
				Fan / Auxiliary Voltage	24V

				Lamp
				Lamp Type	100 Watt mercury
				Lamp Voltage	30VDC ± 3V
				Burning Position	Vertical
				Radiation Flux	12.6 Watts
				Warm-up Time	1 to 2 minutes
				Cooling time before Restart	2 to 5 minutes typical
				Output Intensity (typical)	>10,000 mW/cm2
				Lamp Life	1000+ hours typical

				Environmental
				Operating Temperature	+10 °C to +40 °C (+50 °F to +104 °F)
				Storage Temperature	0 °C to +60 °C (+32 °F to +140 °F)
				Relative Humidity	30 to 75% operating, 10 to 100% storage
				Cooling	DC fan, forced air
				Over-temp shutdown	65 °C (internal)

				Dimensions
				L x W x H (inches)	10.73” x 4.95” x 11.62”
				Weight (lbs.)	7.5 Pounds

S10 High Intensity UV/Visible Light-Curing Spot Lamp

About

Categories

Information

Contacts