b
> Home > Products > Air Plasma Spray


Want to see SpeedMask® in action?  Call 65 6270 2188 or send us an email for an appointment.
uv
uvquipment t

SpeedMask® Light Curing
Temporary Masking Resins: Air Plasma Spray....Need a sample? Fill in your request here

SpeedMask® light curing masking resins provide superior surface protection of turbine engine and structural components, orthopaedic implants, surgical instruments, and other medical devices during thermal barrier coating processes, such as air plasma sprays.

SpeedMask masking resins have been formulated to be resistant to the aggressive force and heat of flame-spray processes. The cured maskant absorbs the energy from the force of plasma spray materials, such as Zirconium, Molybdenum (used for thermal protection), Tungsten Carbide, or ceramics used for wear-resistant coatings. As the melted particles from the flame spray are deposited onto the substrate, the cured resin protects the surface underneath the protected area.

The aggressiveness of the flame-spray process, and the adhesion needed to protect a substrate surface, must be considered when choosing a masking resin. If a component substrate can accommodate incineration removal, a burn-off grade of SpeedMask masking resin would be appropriate for the process. If a substrate cannot withstand incineration, then a peelable mask would be a better choice. For shadowed areas that need protection, choose a Multi-Cure® SpeedMask resin.
  • Cures in seconds enabling faster processing, greater output, and lower processing costs
  • Residue-free removal
  • Applied by spraying, dipping, or coating
.
Compare the Advantages over Traditional Masking Materials
m
uv
Adhesives
Applications
Viscosity
(nominal)
Shore Hardness
Modulus of Elasticity
MPa [psi]
Cure Time*
Packages Sizes
Available
MSDS
706
  • Acid stripping
  • Air plasma spray
  • Machining
43,000 cP
D75
830 [120,000]
20 seconds
30 mL Syringe (MR)
170 mL Cartridge
300 mL Cartridge
600 mL Cartridge
1 Litre Bottle
1 Gallon Pail
15 Liter Pail		 706
706-H
  • Acid stripping
  • Air plasma spray
  • Machining
30,000 cP
D75
900 [130,000]
20 seconds
30 mL Syringe (MR)
170 mL Cartridge
300 mL Cartridge
600 mL Cartridge
1 Litre Bottle
1 Gallon Pail
15 Liter Pail		 706-H
717-R
  • Plating
  • Anodizing
  • Aggressive grit blasting
  • Shot peening
  • Machining
  • Air plasma spray
21,000 cP
D60
170 [25,000]
30 seconds
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
300 mL Cartridge
600 mL Cartridge
1 Litre Bottle
1 Gallon Pail
15 Liter Pail		 717-R
718-Gel
  • Air plasma spray
  • HVOF
  • Wire arc spray
  • D-gun coating
63,000 cP
D80
760 [110,000]
5 seconds
30 mL Syringe (MR)
170 mL Cartridge
300 mL Cartridge
600 mL Cartridge
1 Litre Bottle
1 Gallon Pail
15 Liter Pail		 718-Gel
726
  • Plating
  • Anodizing
  • Powder coating
  • Parts handling
45,000 cP
D40
2.6 [380]
15 seconds
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
300 mL Cartridge
600 mL Cartridge
1 Litre Bottle
1 Gallon Pail
15 Liter Pail		 726
726-SC
  • Plating
  • Decorative etching & anodizing
  • Powder coating
  • Part handling
  • Air plasma spray
  • Grit blasting
50,000 cP
D40
3.9 [560]
15 seconds
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
300 mL Cartridge
600 mL Cartridge
1 Litre Bottle
1 Gallon Pail
15 Liter Pail		 726-SC
728-G
  • Plating
  • Anodizing
  • Aggressive grit blasting
  • Shot peening
  • Machining
25,000 cP
D55
83 [12,000]
10 seconds
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
300 mL Cartridge
600 mL Cartridge
1 Litre Bottle
1 Gallon Pail
15 Liter Pail		 728-G

    Help us to understand you more:
    1.  What is your current masking method? (tapes / waxes / boots and caps / lacquers etc.)         
    2.  What are the reasons for the change or is this a new project.
    3.  What is the end product? (aerospace blade, gas turbine, machinery etc.)
    4.  What is the substrate / material? (stainless steel, alloy, steel etc.)
    5.  Are there any shadowed areas?
    6.  What is the duration and cycle time?
    7.  What is the expected monthly production volume?
    8.  How do you plan to dispense and cure the proposed material? (manual or automation)

    Email Us!

SINGAPORE
33 Ubi Ave 3, #04-23 VERTEX
Singapore 408868
Tel 65 6270 2188
Fax 65 6270 9188		 MALAYSIA
PT1866 Tingkat Perusahaan 6
Prai Free Industrial Zone, 13600 Prai 
Penang, Malaysia
Tel 604 390 5882 
Fax 604 390 0082		 THAILAND
8 Soi Lasalle 77, Kwaeng Bangna, Khet Bangna
Bangkok 10260, Thailand
Tel 66 2361 2926, 66 2361 2927  
Fax 66 2361 2928		 HONG KONG
33 Ubi Ave 3, #04-23 VERTEX
Singapore 408868
Tel 852 8199 0955  
Fax 65 6270 9188
blaze
©2012 Blaze Technology Pte Ltd, Specifications subject to change without notice.
Email: sales@blazeasia.com | Website: www.blazeasia.com
blaze