BLAZE - Automated Soldering Unit

> Home > Products > Automated Soldering Unit


Soldering Controller For Automation Line/Wire feeder integrated .- 15 kinds of soldering conditions can be selected the most. .- It is easy to save and duplicate data by connecting to a personal computer by means of RS-232C. .- It is easy to see the display by means of the data indication with 7 segments. .- The allowable range of power source is AC100 to 120V ±10%. .- It is possible to set 2 kinds of heater temperatures i.e. normal time condition and idling time condition. .- Timing for shift output can be chosen (4kinds). .- Secondary preheating and third soldering were added. .- Battery is not necessary because of using EPROM for memory. .- Variable range of the heater ready timer is 0 to 99sec. .- Software corresponding to WINDOWS is provided. .- Two types of solder feeder, feeder incorporated type and feeder seprarately placed type, are provided. .- This item has a current CE Marking approval.

USP-870

Number of program

15 programs maximum (selection of 7 or 15 programs)

Number of steps of the program
(Fixed Type)

Primary solder feeding	0~99.9mm
Primary solder feeding speed	0~99.9mm/s
Pre-heating 1	0~9.9sec
Secondary solder feeding	0~99.9mm
Secondary solder feeding speed	0~99.9mm/s
Pre-heating 2	0~9.9sec
Tertiay solder feeding	0~99.9mm
Tertiay solder feeding speed	0~99.9mm/s
Heating	0~9.9sec
Solder back feed	0~99.9mm
Solder back feed speed	0~99.9mm

Temperature Control

Provided when 7 programs are used

Temperature set range for the heater alarm

Variable +/- 0 to 100 degree celsius

RS-232C

Provided

Software corresponding to Windows®* is applied for progam editing

Output signals during operation

Continuity / pulse selection

Exclusive input / output

10-points input, 7-points output

Power source

AC90 to 120, 50/60Hz, 0.5VA + Heater Volume* 2

Weight

Approx 3.0kg

Tip Temperature range

200 to 450 degree celsius Digital readout
a

Soldering Controller For Automation Line/Wire feeder integrated