b
> Home > Products > FIP Gaskets
.

UV Curing FORM-IN-PLACE (FIP) and
CURE-IN-PLACE Gaskets.....Need a sample? Fill in your request here

DYMAX form-in-place (FIP) and cure-in-place gaskets cure completely in seconds - even to 1/4 inch thick beads - with good compression set. UV/Visible light curing, FIP gaskets eliminate ovens, racking, stacking, and waiting for traditional FIP gaskets to cure. DYMAX form-in-place gaskets are silicone free and solvent free.

Designed for sealing intricate, complex configurations as well as flat surfaces or wide, shallow grooves, permanent FIP gaskets can eliminate the delay experienced with slow-curing resins and the design and inventory expense associated with pre-cut gaskets. DYMAX gaskets can easily accommodate component design changes and part variation without additional development costs. DYMAX FIP gaskets are available with a tack-free to pressure-sensitive surface tack and come in low to high, non-sag viscosities. They have excellent adhesion to plastics, glass, and metal and are ideal for trim assembly, sound and vibration dampening, and non-skid applications.

FIP/CIP Gasket Application Durometer Hardness Compression
Set
Substrates
Package Sizes
Available
MSDS

GA-103
Formulated for fuel cells, underwater enclosures, and high temperature sealing applications which require low compression set
A25
< 5%
Plastics
Electroplated Plastics
Metals

30 mL Syringe (MR)
170 mL Cartridge
300 mL Cartridge
1 Liter Bottle
15 Liter Pail
15 Liter Pail

GA-105
Formulated for electrical closures, HVAC ductwork, and automotive casings applications which require soft, sticky, low compression set.
A25
5%
Plastics
Metals
Glass
Ceramics
30 mL Syringe (MR)
170 mL Cartridge
300 mL Cartridge
1 Liter Bottle
15 Liter Pail
er Pail
GA-108
Formulated for electrical closures, HVAC ductwork, appliance casings, speaker assembly, and automotive moisture sealing closures
00-30
10%
Plastics
Metals
Glass
Ceramics
Glass-filled nylon
30 mL Syringe (MR)
170 mL Cartridge
300 mL Cartridge
1 Liter Bottle
15 Liter Pail
15 Liter Pail
New!  
GA-112
Formulated for appliance housings, critical electronic assemblies and devices, and electrical conduit boxes
 
A50
Metals
 
30 mL Syringe (MR)
170 mL Cartridge
300 mL Cartridge
550 mL Cartridge
1 Liter Wide-Mouth Bottle
15 Liter Tapered Pail
.

 
GA-120
Formulated for speaker assembly, sound dampening, and automotive enclosures
 
-
-
Plastics
Metals
30 mL Syringe (MR)
170 mL Cartridge
300 mL Cartridge
1 Liter Bottle
15 Liter Pail
GA-140
Formulated for fuel cells, automotive door handles, appliance housings, and critical electronic assemblies and devices
 
-
-
Most Plastics (ABS, PEEK, PMMA, Nylon, Polycarbonate, Polysulfone, Polyvinyl Chloride)
Metals


30 mL Syringe (MR)
170 mL Cartridge
300 mL Cartridge
1 Liter Bottle
15 Liter Pail

 

    Help us to understand you more:

    1.  What are you using now? (CA / Urethane / Epoxy / Acrylic UV / Activator Cure Acryl / Hot Melt / Silicone etc.)      
    2.  What are the reasons for the change or is this a new project.
    3.  What is the end product? (Appliance, Notebook, Mobile Phone etc.)
    4.  What is the substrate / material? (ABS, PVC etc.)
    5.  What is the board size and coat thickness required?
    6.  Are there any shadowed areas?
    7.  What chemical is used and duration of the process?
    8.  What is the expected monthly production volume?
    9.  How do you plan to dispense and cure the proposed material? (Manual or Automation)

    What are the requirements for the following:
    1.   Viscosity (cps)
    2.   Hardness / Flexibility                                         
    3.   Colour, Clarity or Fluorescing needed
    4.   Military Specification
    5.   UL Recognized
    6.   Thermal Limit
    7.   Low Outgassing
    8.   Moisture Resistance
    9.   Surface / Volume Resistivity
    10. Curing Method
(UV / Heat or Moisture)
    11. Others (please specify)

    What are the testings done:
    1.  Adhesion  
    2.  Thermal Shock / Cycle  
    3.  Electrical Properties
    4.  Moisture / Humidity / Solvent Resistance
    5.  Others (please specify)
   
    Email Us!
.
SINGAPORE
33 Ubi Ave 3, #04-23 VERTEX
Singapore 408868
Tel 65 6270 2188
Fax 65 6270 9188
MALAYSIA
T1866 Tingkat Perusahaan 6
Prai Free Industrial Zone, 13600 Prai 
Penang, Malaysia
Tel 604 390 5882 
Fax 604 390 0082
THAILAND
8 Soi Lasalle 77, Kwaeng Bangna, Khet Bangna
Bangkok 10260, Thailand
Tel 66 2361 2926, 66 2361 2927  
Fax 66 2361 2928
HONG KONG
33 Ubi Ave 3, #04-23 VERTEX
Singapore 408868
Tel 852 8199 0955  
Fax 65 6270 9188
blaze
©2011 Blaze Technology Pte Ltd, Specifications subject to change without notice.
Email: sales@blazeasia.com | Website: www.blazeasia.com
blaze