aa
|
aaaa
|
| |
1000
Syringe Filling System
|
| Features |
Adjustable
suck-back feature allows for a clean dispense
of stringy and tacky materials. |
| |
Accepts
syringes with a variety of different tip configurations
including Luer Lock, Luer Slip, and Oral Syringes. |
|
|
Adjustable,
positive, mechanical stop assures an accurate
fill. |
| |
Utilizes
disposable wetted components, eliminating messy
clean up. (Components can be cleaned for re-use) |
| Overall
Dimensions |
18"
x 28 " x 12 " (45.72 cm x 71.12 cm x 30.48 cm) |
| Maximum
Pressure |
100
psi |
| Packed
weight |
15
lbs. (6.8 kg) |
| Part
Number |
1000 |
| |
|
|
aa
|
aaaa |
1100
Syringe Filling System
|
| Features |
This
system can be adapted to accept virtually any
type of common syringe.
Total machine cycle time is dependent on fill
volume but is generally between 2 and 5 seconds.
|
| |
Two
syringes are handled simultaneously (although
the dispense cycles are actually independent).
|
| |
Operator
does not have to hold or watch the syringes
during a cycle. Once the syringes are located
on the nozzles the machine automatically grips
and holds the syringe so the operator is free
to get two more syringes while the first two
are filling. |
| |
Adjustable
level dual photo sensor automatically senses
the syringe plungers when they reach the full
position. This provides as accurate fill while
avoiding the problems previously described.
|
| |
When
the cycle is complete the same gripping system
that holds the syringe in place pulls the syringe
off the luer taper and ejects the syringe into
a waiting container or onto a conveyor.
|
| Weight |
16 lbs.
(7.26 kg) |
| Overall
Dimensions |
23"
x 15 " x 10 " (58.42 cm x 38.1 cm x 25.4
cm) |
| Part
Number |
1100 |
| |
|
|
aa
|
aaaa |
1200
Dual Syringe Filling System
|
| Features |
Fills
dual syringes |
| |
Air
operated |
|
|
Built
in electronic PLC controller |
| |
Dual
pressurized cartridge reservoirs |
| |
Built
in purge system |
| |
Wetted
surface is replaceable 3/8 OD tubing |
| |
Short
coupled feed system |
| |
Suitable
for low to medium viscosity materials |
| |
Foot
switch operated |
| |
Based
on 828 valve design |
| |
Adjustable
fill level, electronically controlled |
| Electrical
Power |
120V
AC/12V |
| Size |
24"
x 24 " x 19 " (60.96 cm x 60.96 cm x 48.26 cm) |
| Weight |
67
lbs. (30.39 kg) |
| Actuating
air pressure required |
Material
dependant |
| Overall
Dimensions |
18"
x 28 " x 12 " (45.72 cm x 71.12 cm x 30.48 cm) |
| Maximum
fluid press |
100
psi |
| Part
Number |
1200 |
| |
|
|
aa
|
aaaa |
2000
Syringe Filling System Specifications
|
| Features |
|
| Electrical
Power |
|
| Size |
|
| Weight |
|
| Actuating
air pressure required |
|
| Overall
Dimensions |
|
| Maximum
fluid press |
|
| Part
Number |
2000 |
| |
|
| |
|
| |
|
| |
|
|
aa
|
aaaa |
2200 Cartridge
Filling System Specifications
|
| Features |
Fills
cartridges |
| Electrical
Power |
|
| Size
|
|
| Weight |
|
| Actuating
air pressure required |
|
| Overall
Dimensions |
|
| Maximum
fluid press |
|
| Part
Number |
2200 |
|
|
|
|
|
|
| |
~
~
~
|
|
| |
|
©2010 Blaze Technology Pte Ltd, Specifications subject
to change without notice.
Tel: 65 6270 2188 | Fax: 65 6270 9188 | Email: sales@blazeasia.com
| Website: www.blazeasia.com
|
blaze>
Home > Syringe Filling System